Sketch Formula

Extrude

Feature

Quick Pick Shapes

Stretch Part/Assembly

Modify

Transform

Direct Edit

Sketch

Drawing

Modify

Create

Assembly Tree Exporter

Operations

Inspection

Positioning Constraints

Mate & Align Positioning

Positioning

Save As Part/Assembly

Save All As External

Unlink (External)

External File Operations

Unfold/Fold

Operations

Corners

Solid/Surface Flat Pattern from Faces

Convert to Sheetmetal part

Solid part to Sheetmetal part

Solid/Surface

Solid/Surface

Dimension

Grundutbildning

Grunderna i 3D-modellering

(39 minuter)

Introduktion av grundutbildning

Gratulerar! Du har hittat det snabbaste och bästa sättet att lära dig 3D CAD.

Övning 01 | Översikt 3D-scenen

Få en första överblick av gränssnittet och ikoner.

Övning 02 | Drag-och-släpp modellering 1/3

Använda kameran och bygga en enkel klossmodell via dra-och-släpp.

Övning 03 | Drag-och-släpp modellering 2/3

Använda kameran och bygga en 3D-modell med features.

Övning 04 | Drag-och-släpp modellering 3/3

3D-modell med flera features och introduktion av TriBall.

TriBall-grunder

(25 minuter)

Övning 05 | Triballövning del 1/3

Kom igång med verktyget TriBall!

Övning 06 | Triballövning del 2/3

Flytta, vrid och vänd en part med TriBall mot andra geometrier.

Övning 07 | Triballövning del 3/3

Skapa länkade kopior och mönster av features med TriBall.

Bordsövning

(29 minuter)

Övning 08 | Bordsövning del 1/5

Koncepta fram en enkel sammanställning med flera parter.

Övning 09 | Bordsövning del 2/5

Modellerar fötter till bordet och lägger färger.

Övning 10 | Bordsövning del 3/5

Kopierar foten och modifierar som stöd till bordsskivan.

Övning 11 | Bordsövning del 4/5

Byter ut benet i mitten mot fyra länkade ben.

Övning 12 | Bordsövning del 5/5

Fasar av en kant på fötterna och kopierar med TriBall.

Sketchverktyg

(43 minuter)

Övning 13 | Tvärsnittet/Sketch

Genomgång av Sketch (tvärsnittet) och skapar en Extrude feature.

Övning 14 | Spin Wizard del 1/2

Rörböj via Spin Wizard.

Övning 15 | Spin Wizard del 2/2

Svarvad axel med Spin Wizard.

Övning 16 | Sweep Wizard

Tråd, rör och slangar via Sweep Wizard.

Övning 17 | Loft Wizard

Friformsmodeller med Loft Wizard.

Stirlingmotor

(2.7 timmar)

Övning 18 | Stirlingmotor del 1/21

Snabb och enkel konceptmodell av Stirlingmotor.

Övning 19 | Stirlingmotor del 2/21

Bygg grunden till Cylindern via drag-och-släppmetoden.

Övning 20 | Stirlingmotor del 3/21

Vevhus och Lock samt anger egenskaper som namn och artikelnummer.

Övning 21 | Stirlingmotor del 4/21

Grunden till Pelaren via drag-och-släppmetoden.

Övning 22 | Stirlingmotor del 5/21

Bygger Lagerfästet via drag-och-släppmetoden.

Övning 23 | Stirlingmotor del 6/21

Vevskiva, Lagerhållare och Bussningar. Positionerar med TriBall.

Övning 24 | Stirlingmotor del 7/21

Finjusterar Cylinderns form via Sketch. TriBall för en roterad hålbild.

Övning 25 | Stirlingmotor del 8/21

Arbetskolv med Spin Shape samt använder Section Tool på Vevhuset.

Övning 26 | Stirlingmotor del 9/21

Bygger Kolvbussning och Axelfäste, samt justerar Pelaren något.

Övning 27 | Stirlingmotor del 10/21

Gängade hål på Pelaren, Axelfästet och Vevskivan med IronPRO XT.

Övning 28 | Stirlingmotor del 11/21

Koncepta fram Vevstakar vars form vi senare kommer att finjustera.

Övning 29 | Stirlingmotor del 12/21

Bygger Ledfäste för Kolv och Vevstake vid Cylindern.

Övning 30 | Stirlingmotor del 13/21

Finjustering av Vevstakar via Sketch. Cirkelbågar, Trim och Extend.

Övning 31 | Stirlingmotor del 14/21

Svänghjul med Pattern Feature för hålbild samt Draft Feature för släppning.

Övning 32 | Stirlingmotor del 15/21

Modellerar fram och färdigställer Glaskolv och Glascylinder.

Övning 33 | Stirlingmotor del 16/21

Färdigställer Pelaren med Loft Shape och Blend. Namnsätter Vevstakar.

Övning 34 | Stirlingmotor del 17/21

Positionerar Vevstakarna, Ledfästet och Vevskivan med Triball.

Övning 35 | Stirlingmotor del 18/21

Skruvar och brickor via Fasteners i katalogen IronPRO XT Mech.

Övning 36 | Stirlingmotor del 19/21

Skruvar, brickor och muttrar via Fasteners i katalogen IronPRO XT Mech.

Övning 37 | Stirlingmotor del 20/21

Skruvar fast Lagerhållaren i Lagerfästet. Monterar Axel.

Övning 38 | Stirlingmotor del 21/21

Bottenplatta med räcke via 3D-kurva och Sweep Wizard.

Övning 38a | Bonus Lagerfäste

Övning 38b | Bonus Lock

Övning 38c | Bonus Cylinder

2D-ritning

(2.5 timmar)

Övning 39 | Sammanställning Stirlingmotor

Sammanställningsritning med stycklista och pos-ballonger.

Övning 40 | Detaljritning Cylinder del 1/2

Skapar detaljritning med snittvy från externt länkad part.

Övning 41 | Detaljritning Cylinder del 2/2

Måttsätter detaljritning och fyller i ritningshuvud.

Övning 42 | Detaljritning Vevhus

Detaljritning av Vevhuset, snittvy samt partiellt snitt.

Övning 43 | Detaljritning Pelare

Detaljritning av Pelaren direkt från 3D-scenen. Snittvy och måttsättning.

Övning 44 | Detaljritning Svänghjul

Detaljritning av Svänghjulet med hålmönster samt en Aligned Section View.

Övning 45 | Delsammanställning Motor

Delsammanställningsritning av Motor med stycklista samt pos-ballonger.

Övning 46 | Monteringsritning del 1/2

Sprängd konfiguration av Motor i 3D-scenen.

Övning 47 | Monteringsritning del 2/2

Monteringsritning från exploderade konfiguration med färglagd vy.

Övning 48 | Monteringsritning Steg-för-steg del 1/2

Konfigurationer i 3D-scenen med varje monteringssteg var för sig.

Övning 49 | Monteringsritning Steg-för-steg del 2/2

Monteringsritning med beskurna vyer från steg-för-steg-modellen.

Övning 50 | Bulk Drawing Creation

Bulk Drawing Creation för att snabbt skapa stor mängd 2D-ritningar.

Övning 51 | Ritningsblankett Del 1/2

Skapa en egen 2D-ritningsmall. Inställningar av stilar och lager.

Övning 52 | Ritningsblankett Del 2/2

Lägga till egen logotyp samt testa och spara ritningsmall.

Övning 53 | Stycklista BOM Del 1/2

Hantera stycklistans och pos-ballongernas inställningar.

Övning 54 | Stycklista BOM Del 2/2

Lägga till kolumner till stycklistan och spara som en mall.

Övning 55 | Bulk Drawing Creation-ritningsmall

Ritningsmall för Bulk Drawing Creation.

Kataloger och Ankarpunkt

(47 minuter)

Övning 56 | Kataloghantering del 1/4

Bygg kataloger med parter, färger, texturer, grupper av objekt mm.

Övning 57 | Kataloghantering del 2/4

Gruppera objekt i en katalog. Skillnad på part och feature. Ankarpunkt.

Övning 58 | Ankarpunkten del 1/2

Ankarpunkten som styr objektets position i XYZ-koordinatsystemet.

Övning 59 | Ankarpunkten del 2/2

Position och orientering kontrolleras av Ankarpunkten med TriBall.

Övning 60 | Kataloghantering del 3/4

Intellishape Properties bygger in features i en extrudering.

Övning 61 | Kataloghantering del 4/4

Skapa eget materialbibliotek med material och färger i katalog.

Import och Direct Face Modeling

(28 minuter)

Övning 62 | Import av 3D-filer

Hantera och modifiera importerad Parasolid.

Övning 63 | Modifiera importerad geometri

Med Direct Face Modeling modifiera formen på importerad modell.

Övning 64 | Konvertera import till Sheet Metal part

Convert to Sheet Metal för att bocka plåt från importerad geometri.

Övning 65 | Importinställningar

Genomgång av olika inställningarna för hantering vid import.

Videoanimering

(24 minuter)

Övning 66 | Videoanimering del 1/2

Animera montering av Motorn med animeringsbanor.

Övning 67 | Videoanimering del 2/2

Justera ordning på animerade modeller samt exportera video.

Bildrendering

(21 minuter)

Övning 68 | Bildrendering del 1/2

Fotorealistiska bilder av modeller. Bakgrund, kameror och ljussättning.

Övning 69 | Bildrendering del 2/2

Rendera fram en produktbild och spara den.

Sheet Metal

(26 minuter)

Övning 70 | Sheet Metal-modellering

Skapa hållare av bockad plåt med grundfunktionerna för Sheet Metal.

Övning 71 | Sheet Metal Utbredning och 2D-ritning

Utbredning av bockad plåt. Skapa skärmall i DXF-format via 2D-ritningen.

Övning 72 | Sheet Metal-funktioner

Sheet Metal, grundinställningar och hantering features.

Tillägg KeyShot

(12 minuter)

Övning 73 | Bildrendering med KeyShot

Rendera fotorealistiska bilder via direktlänken till KeyShot.

Tillägg Multiphysics

(18 minuter)

Övning 74 | FEM-beräkning med Multiphysics del 1/2

Hållfasthetsberäkna part direkt i 3D-scenen.

Övning 75 | FEM-beräkning med Multiphysics del 2/2

Hållfasthetsberäkna 2 parter med olika material direkt i 3D-scenen.

Step By Step Training

Course Overview

Training Introduction

(2 minutes)

Introduction to the Basic Training Course

The Basics

(30 minutes)

Training 01 | Drag & Drop Modelling (1/3)

Training 02 | Drag & Drop Modelling (2/3)

Training 03 | Drag & Drop Modelling (3/3)

Training 04 | Toy Car Exercise

TriBall Training

(22 minutes)

Training 05 | TriBall (1/3)

Training 06 | TriBall (2/3)

Training 07 | TriBall (3/3)

Table Exercise

(30 minutes)

Training 08 | Table Exercise (1/5)

Training 09 | Table Exercise (2/5)

Training 10 | Table Exercise (3/5)

Training 11 | Table Exercise (4/5)

Training 12 | Table Exercise (5/5)

Feature Tools

(45 minutes)

Training 13 | Extrude

Training 14 | Spin (1/2)

Training 15 | Spin (2/2)

Training 16 | Sweep

Training 17 | Loft

Stirling Engine

(2.5 hours)

Training 18 | Stirling Engine (1/24)

Training 19 | Stirling Engine (2/24)

Training 20 | Stirling Engine (3/24)

Training 21 | Stirling Engine (4/24)

Training 22 | Stirling Engine (5/24)

Training 23 | Stirling Engine (6/24)

Training 24 | Stirling Engine (7/24)

Training 25 | Stirling Engine (8/24)

Training 26 | Stirling Engine (9/24)

Training 27 | Stirling Engine (10/24)

Training 28 | Stirling Engine (11/24)

Training 29 | Stirling Engine (12/24)

Training 30 | Stirling Engine (13/24)

Training 31 | Stirling Engine (14/24)

Training 32 | Stirling Engine (15/24)

Training 33 | Stirling Engine (16/24)

Training 34 | Stirling Engine (17/24)

Training 35 | Stirling Engine (18/24)

Training 36 | Stirling Engine (19/24)

Training 37 | Stirling Engine (20/24)

Training 38 | Stirling Engine (21/24)

Training 38a | Stirling Engine (22/24)

Training 38b | Stirling Engine (23/24)

Training 38c | Stirling Engine (24/24)

2D Drawings

(2.5 hours)

Training 39 | 2D Drawing (1/7)

Training 40 | 2D Drawing (2/7)

Training 41 | 2D Drawing (3/7)

Training 42 | 2D Drawing (4/7)

Training 43 | 2D Drawing (5/7)

Training 44 | 2D Drawing (6/7)

Training 45 | 2D Drawing (7/7)

Training 46 | Exploded Views (1/2)

Training 47 | Exploded Views (2/2)

Training 48 | Assembly Instruction (1/2)

Training 49 | Assembly Instruction (2/2)

Training 50 | Bulk Drawing (1/2)

Training 51 | Customize 2D Template (1/2)

Training 52 | Customize 2D Template (2/2)

Training 53 | Customise BOM (1/2)

Training 54 | Customise BOM (2/2)

Training 55 | Bulk Drawing (2/2)

Catalogs

(45 minutes)

Training 56 | Catalogs (1/4)

Training 57 | Catalogs (2/4)

Training 58 | Anchors (1/2)

Training 59 | Anchors (2/2)

Training 60 | Catalogs (3/4)

Training 61 | Catalogs (4/4)

Import Editing

(27 minutes)

Training 62 | Import Geometry (1/4)

Training 63 | Import Geometry (2/4)

Training 64 | Import Geometry (3/4)

Training 65 | Import Geometry (4/4)

Animation

(22 minutes)

Training 66 | Animation (1/2)

Training 67 | Animation (2/2)

Rendering

(19 minutes)

Training 68 | Rendering (1/2)

Training 69 | Rendering (2/2)

Sheet Metal

(25 minutes)

Training 70 | Sheet Metal (1/3)

Training 71 | Sheet Metal (2/3)

Training 72 | Sheet Metal (3/3)

Add-on Training

(28 minutes)

Training 73 | Render in KeyShot

Training 74 | MultiPhysics (1/2)

Training 75 | MultiPhysics (2/2)

Webinar | Making Assembly Modelling Simple

Assemblies

Webinar | MultiPhysics

Webinar | Reuse CAD Models For New Products

Reuse. Existing or imported models.

What are SmartModels?

Handles. Push/Pull. Sizebox.

Wrap Curve

Zebra Stripes

Visualize curvature of complex surfaces

curvature.

Beginner Training



Introduction to the Basic Training Course

Training 01 | Drag & Drop Modelling (1/3)

Training 02 | Drag & Drop Modelling (2/3)

Training 03 | Drag & Drop Modelling (3/3)

Training 04 | Toy Car Exercise

Training 05 | TriBall (1/3)

Training 06 | TriBall (2/3)

Training 07 | TriBall (3/3)

Training 08 | Table Exercise (1/5)

Training 09 | Table Exercise (2/5)

Training 10 | Table Exercise (3/5)

Training 11 | Table Exercise (4/5)

Training 12 | Table Exercise (5/5)

Training 13 | Extrude

Training 14 | Spin (1/2)

Training 15 | Spin (2/2)

Training 16 | Sweep

Training 17 | Loft

Training 18 | Stirling Engine (1/24)

Training 19 | Stirling Engine (2/24)

Training 20 | Stirling Engine (3/24)

Training 21 | Stirling Engine (4/24)

Training 22 | Stirling Engine (5/24)

Training 23 | Stirling Engine (6/24)

Training 24 | Stirling Engine (7/24)

Training 25 | Stirling Engine (8/24)

Training 26 | Stirling Engine (9/24)

Training 27 | Stirling Engine (10/24)

Training 28 | Stirling Engine (11/24)

Training 29 | Stirling Engine (12/24)

Training 30 | Stirling Engine (13/21)

Training 31 | Stirling Engine (14/24)

Training 32 | Stirling Engine (15/24)

Training 33 | Stirling Engine (16/24)

Training 34 | Stirling Engine (17/24)

Training 35 | Stirling Engine (18/24)

Training 36 | Stirling Engine (19/24)

Training 37 | Stirling Engine (20/24)

Training 38 | Stirling Engine (21/24)

Training 38a | Stirling Engine (22/24)

Training 38b | Stirling Engine (23/24)

Training 38c | Stirling Engine (24/24)

Training 39 | 2D Drawing (1/7)

Training 40 | 2D Drawing (2/7)

Training 41 | 2D Drawing (3/7)

Training 42 | 2D Drawing (4/7)

Training 43 | 2D Drawing (5/7)

Training 44 | 2D Drawing (6/7)

Training 45 | 2D Drawing (7/9)

Training 46 | Exploded Views (1/2)

Training 47 | Exploded Views (2/2)

Training 48 | Assembly Instruction (1/2)

Training 49 | Assembly Instruction (2/2)

Training 50 | Bulk Drawing (1/2)

Training 51 | Customize 2D Template (1/2)

Training 52 | Customize 2D Template (2/2)

Training 53 | Customize BOM (1/2)

Training 54 | Customize BOM (2/2)

Training 55 | Bulk Drawing (2/2)

Training 56 | Catalogs (1/4)

Training 57 | Catalogs (2/4)

Training 58 | Anchors (1/2)

Training 59 | Anchors (2/2)

Training 60 | Catalogs (3/4)

Training 61 | Catalogs (4/4)

Training 62 | Import Geometry (1/4)

Training 63 | Import Geometry (2/4)

Training 64 | Import Geometry (3/4)

Training 65 | Import Geometry (4/4)

Training 66 | Animation (1/2)

Training 67 | Animation (2/2)

Training 68 | Rendering (1/2)

Training 69 | Rendering (2/2)

Training 70 | Sheet Metal (1/3)

Training 71 | Sheet Metal (2/3)

Training 72 | Sheet Metal (3/3)

Training 73 | Render in KeyShot

Training 74 | MultiPhysics (1/2)

Training 75 | MultiPhysics (2/2)

2D Drawings & DXFs



Creating 2D Drawings

Overview of how to create 2D drawings from your IronCAD 3D Models.

DXF Creation For CNC

How to create a DXF/DWG for manufacturing (CNC, LASER, etc).

dwg laser cnc

BOM & Cutlist Setup

How to create a Bill of Materials (BOM) or Cutlist from your 3D model.

Creating cut lists. Bill of materials. Parts list for manufacturing.

Webinar | Going from 2D to 3D

Import Reference 2D

2D Drawing View Creation Types

SmartDimension Settings 2D Drawings

2D Dimensions.

Add Logo Images To Drawings

Add an image into your drawing sheet template.

Drawing template images. Open image.

Create 2D BOM Templates

Bill of materials. Template.

2D Drawing Spell Checker

spelling

Aligning Annotations on 2D Drawings

Alignment.

Automatic Dimensioning 2D Drawings

Automatic dimensioning. Dimensions.

Adding Lines/Geometry to 2D Drawing Views

Supplementary geometry

Printing 2D Drawings (Paper or PDF)

Hole Tables in 2D Drawings

Hole tables.

ICD and CAXA Draft

IronCAD's two different 2D drawing and drafting environments.

CAXA Draft. 2D Drawing. ICD.

Catalogs & Modular



Modular Design Preview

Quick preview of IronCAD's modular design capabilities.

Modular & Parametric Packaging

Example of Push & Pull Parametric packaging using IronCAD's handles.

Para. Parametric. Packaging. Nefab.

Attachment Point

Create modular parts than automatically connect.

Modular. Attachment points. Smart Assembly.

Push & Pull Parametric Design Intelligence

NEFAB. Package. Packaging. Pallet. Parameters. SmartAssembly. Smart Assembly.

Anchors

Control how items drop from the catalog.

Interaction properties. Move anchor.

Attachment Point Connector

Reconnect and reposition attachment point items.

Flexible Shapes Catalog

Flex shapes catalog.

Attachment Point Parallel Constraint

Modular. SmartAssembly. eBehaviour

Parametric Push & Pull Setup

How to set up Push & Pull Parametric models with IronCAD's handles.

Parametric design. Parameters. Push Pull Parameters. Sizebox Parameters.

Tank Parametric Demo

What are SmartModels?

Handles. Push/Pull. Sizebox.

Catalog Management

Assembly Features

Features that cut through multiple parts in a model or Assembly.

Cut parts. Assembly cut. Hole through multiple parts. Cut two (2) parts. Cut three (3) parts.

Drag & Drop Quick Properties From Catalogs

Create a catalog item to auto-populate part properties (Part Number, Description, Price etc).

Properties catalog Smart Paint

Webinar | Drag & Drop Catalog System

Catalog. Catalogs. Drag and drop. Drag & drop webinar. Drag and drop webinar.

CADENAS Part Library

library

Catalogs

Drag and drop. Drag & Drop.

Attachment Point Parameters / Expressions

smart ebehavior smartassembly smart assembly

Webinar | Reuse CAD Models For New Products

Reuse. Existing or imported models.

Structural Steel



Structural Steel Overview

How to use Structural Steel with IronCAD Mechanical.

ICMECH - Steels Tutorial 1

ICMECH - Steels Tutorial 2

Steel Stairs and Rails Tools - ICMECH

stairs railings stair railing stair fence

Webinar | IronCAD Mechanical

Custom Steel Feature - ICMECH

Custom Steel Extrude Custom Extrude

Steel Caps and Inserts - ICMECH

Steel cap steel structural capping

Cosmetic Weld

Sheet Metal



Sheet Metal Preview

Very short preview of IronCAD's sheet metal tools.

Sheet Metal in Detail

Detailed look at IronCAD's different sheet metal tools.

Webinar | Sheet Metal Design

Sheet Metal Miter

Miter sheet metal bends around edges of a part.

Sheet Metal Loft

Square to round, press bends, and more.

Convert to Sheet Metal part

Convert standard or imported geometry to Sheet Metal parts.

Import sheet metal.

Solid part to Sheetmetal Part

Convert to sheet metal. Rip. Bend.

Sheet Metal Loft with Press Bends

Round to square. Duct.

Sketched Bend

Sheet metal parts from bends sketched on a flat sheet.

Convert to Sheetmetal part

Convert an imported part to be used with IronCAD sheet metal.

Convert imported part to sheetmetal. Convert sheetmetal. Sheet metal.

Bend Notch

Add a cut/alignment notch to sheet metal bends.

Bend relief. Bend notch. Bend cut out.

Sketch Bend Sheet Metal

Create a sheet metal part by drawing bend lines on a flat sheet.

Sketched Bend. Bend from flat. Fold.

Sheet Metal edit cut in Flat Mode

Cut unfold.

Stamp / Form / Punch Shapes in Sheet Metal

Editing Sheet Metal Stock Table or Tool Table

Stocktbl Tooltbl Tooltable Stocktable

Punch Bend Sheet Metal

Cut out and bend a section of a sheet.

Punch Stamp Sheet Metal

Bend Reliefs in Sheet Metal

Sheet Metal Part Properties

Kfactor K-factor k factor. Guage. Code. Minimum bend radius. Stock properties. Allowance.

Sheet Metal Bend Settings

The options available to customize sheet metal Bends.

Unfold / Refold Sheetmetal

Bend Notch for Sheet Metal Press Bends

Press notch. Check out. Sheet metal.

Corner Break

Unfold / Refold Individual Bends

Corner Relief

Forming Tool

Form. Sheet metal press.

Add Closed

Closing sheet metal corners in parts.

Move Bend Editing Handles in Sheet Metal

Solid/Surface Flat Pattern from Faces

Create a flat pattern from curved surfaces.

Presentation



Query

Extract pricing and other info for quotes.

Quote. Query properties. Pricing.

Share 3D on the cloud

Share your IronCAD model in an online link to send anyone a preview.

SmartPaint

Apply colors, textures, and more to your model.

Color Colour Texture Bump Decal Transparent Paint Environment Metallic Metal Wood Timber Plastic Glass

Background Settings

Customise background color and environment imagery.

Background color. Image. HDRI. Skybox. Cube map.

Realistic Rendering

Customize shadows, reflections, ambient occlusion and more.

Shadow. Ambient occlusion. Reflections.

Large Model Graphics Performance Option

Graphics Rotation Speed

Fog

Texture Mapping Tools

decal. bump. texture.

Text Annotations

Text annotations in 3D.

Annotations. Notes.

KeyShot Quick Demo

Quick demonstration of rendering a platform in KeyShot for IronCAD.

SmartMarkup Collaboration & Sharing

Annotation. Share.

KeyShot Exploded View

exploded. key shot.

Lights / Scene Lighting

Place and control lights for rendering.

Light. Insert light. Directional light. Spot light. Area light. Point light.

Convert Compose Data

Compose. Configurator. Light format. Light model. IP.

Fill EyeDropper

Copy colors, textures, materials, and properties between parts.

Quick Transparency Catalog Items

Create a catalog item to enable or disable transparency of parts.

SmartPaint Smart Paint Transparent Clear

Render

How to create product renders and the options available.

Rendering. Render Option. Global Illumination. Super-Sampling.

Rendering Settings

Render.

Exposure

Analysis & Testing



Positioning Constraints

Lock the movement of parts to simulate real-world mechanisms.

Query

Extract pricing and other info for quotes.

Quote. Query properties. Pricing.

Mechanism Mode

Simulate real-world movement mechanisms.

Mechanism. Movement. Physics. Simulation.

Check Interference

Investigate overlapping or interfering parts.

Measurement

Do temporary measurements of geometry.

Measure area. Curve length. Arc Length. Surface Area. Minimum distance. Maximum distance.

Analysis

Analyse moments of inertia, mass density, surface area and more.

Moments of inertia. Moment of inertia. (l_xy, l_yz, l_zx). Mass density.

Draft Analysis

Check Draft angles for molding and casting.

Mold. Molding.

MultiPhysics Tutorial 1

Measure (Area & Curve)

Measure area. Area. Measure curve. Measure edge. Edge measurement. Curve Measurement.

MultiPhysics Tutorial 5

MultiPhysics Tutorial 2

MultiPhysics Tutorial 3

Training 75 | MultiPhysics (2/2)

Training 74 | MultiPhysics (1/2)

MultiPhysics Quick Overview

Fixed in Parent

Lock an item down for movement simulation.

Fix. Locked. Constrain. Simulation.

MultiPhysics Tutorial 4

Webinar | MultiPhysics

This tutorial uses the Mechanical Add-on, click here to download it.

This tutorial requires the MultiPhysics Add-on, click here to download it.

Download the 3D files used in this course

This tutorial requires the KeyShot Add-on, click here to download it.

Click here to download the tutorial files used in these examples.

Download the 3D files used in this course

Ladda ned Övningsfiler

support@solidmakarna.se

08-556 185 48

Solidmakarna AB
Luntmakargatan 34
111 37 Stockholm

www.solidmakarna.se

Kontakta IRONCAD Sverige